
Hardmount Air Compressor
Model No. X280
X280 features include a standard 1/4” NPT stainless steelbraided leader hose with inline check valve and insulated wiringfor simple installation.
Note:Use thread sealant for proper installation.Teflon tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. lbs.
Included Parts:
- Check Valve
- Vibration Isolators
- Mounting Hardware
- Stainless Steel Braided Leader Hose
- Direct Air Filter Assembly
- (2) Replacement Air Filter Elements
- Installation Instructions
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 30% @ 100 PSI
- Max. Working Pressure: 150 PSI
- Max. Amp Draw: 20 Amps
- Dimensions: 7.8"L x 3.95"W x 6.35"H
- Net Weight: 6.95 lbs.
13886501872
13809667059
| PSI | CFM | A | BAR | LPM | A |
| 0 | 1.31 | 8 | 0 | 37 | 8 |
| 10 | 1.29 | 9 | 1 | 33 | 10 |
| 20 | 1.15 | 10 | 2 | 31.5 | 11 |
| 30 | 1.11 | 12 | 3 | 29 | 13 |
| 40 | 1.04 | 13 | 4 | 26.5 | 14 |
| 50 | 0.99 | 13 | 5 | 24 | 14 |
| 60 | 0.92 | 14 | 6 | 22 | 15 |
| 70 | 0.87 | 14 | 7 | 21 | 15 |
| 80 | 0.81 | 15 | 8 | 19.5 | 16 |
| 90 | 0.76 | 15 | 9 | 17.5 | 15 |
| 100 | 0.74 | 15 | 10 | 15.5 | 15 |
| 110 | 0.71 | 15 | |||
| 120 | 0.67 | 16 | |||
| 130 | 0.62 | 15 | |||
| 140 | 0.57 | 15 | |||
| 150 | 0.51 | 15 | * Supply Voltage: 13.8 Volts | ||
| 2.5 Gallon Tank | Fill Rate |
| 0 to 105 PSI | 2 min. 55 sec. |
| 85 to 105 PSI | 44 sec. |
| 0 to 145 PSI | 4 min. 41 sec. |
| 110 to 145 PSI | 1 min. 36 sec. |
| 5.0 Gallon Tank | Fill Rate |
| 0 to 105 PSI | 5 min. 26 sec. |
| 85 to 105 PSI | 1 min. 17 sec. |
| 0 to 145 PSI | 8 min. 52 sec. |
| 110 to 145 PSI | 2 min. 52 sec. |